Manual ETH-IDIO-16 B1
9
Chapter 3: Hardware Details
Option Selections
Refer to the settings program installed with the software package. Also, refer to the Block Diagram and the
Option Selection Map when reading this section of the manual.
Figure 3-1: ETH-IIRO-16 Option Selection Map
Ethernet Connector
The Ethernet Connector is an industry standard RJ45 10/100 Base T type with integrated transmit / receive
LEDs.
Input Filters
Filter jumpers are installed in the shipping configuration, which eliminates response to transient noise or spikes
on the inputs. For faster response to changing inputs, remove the filter jumpers for the affected channels.
LED
The LED on the front of the board is used to indicate power when on steady, and activity / communication on
the Ethernet lines when flickering.
