12
www.accentworkspaces.co.nz
K. SWITCHING BETWEEN MODES-6HC
1. Keep pressing Button “M” for 3 seconds. Handset will display “S---”, then release pressing button “M”
and press button “M” again to enter, the code
“1Un”
will then appear.
2. Press button “Up”/“Down” to be
“6Hc”
, then press button “M” to enter, this will display current mode:
“001”. You also can press button “Up”/“Down”, so that it will display “002”.
We have two modes for your choosing.
“001” mode: You need to keep pressing up or down button so that desk will motion.
“002” mode: You only need to press one time up or down button, the desk will motion, click press any
button the motion will be stopped.
3. Press button “Up”/“Down” to select your favorite mode (001 or 002), then press button “M” to preserve
and quit, please wait for 2 seconds and it will display current height.
M. RESTORE FACTORY SETTINGS-8R
1. Keep pressing button “M” for 3 seconds. Handset will display “S---”, then release pressing button “M”
and press button “M” again to enter, the code
“1Un”
will then appear.
2. Press button “Up”/“Down” to be
“8r”
, press button “M” to enter, will flash.
3. Press button “M” to preserve and quit, “rES” will appear, need a
reset
to finish restoring factory setting.
(About reset, please refer to Step C)
L. ADJUST BOUNCE HEIGHT-7H
1. Keep pressing button “M” for 3 seconds. Handset will display “S---”, then release pressing button “M”
and press button “M” again to enter, the code
“1Un”
will then appear.
2. Press button “Up”/“Down” to be
“7H”
, then press button “M” to enter, this will display current bounce
height.
3. Press button “Up”/“Down” to set a favourite bounce height, then press button “M” to preserve and quit,
please wait for 2 seconds and it will display current height.
N. FATIGUE TEST MODE-9D
1. Keep pressing button “M” for 3 seconds. Handset will display “S---”, then release pressing Button “M”
and press button “M” again to enter, the code
“1Un”
will then appear.
2. Press button “Up”/“Down” to be
“9d”
, then press button “M” to enter. It will appear , press 5 times
button “1” continuously, you can enter into fatigue mode selecting menu. There will be 5 modes for your
choosing.
OFF: No fatigue test.
51: Level 1 fatigue test, continue working,no stop.
52: Level 2 fatigue test, upward and downward 1 time then rest for 4 minutes.
53: Level 3 fatigue test, upward and downward 1 time then rest for 6 minutes.
54: Level 4 fatigue test, upward and downward 1 time then rest for 10 minutes.