0800 126 826 | [email protected]
11
H. ADJUST UPWARD SENSITIVITY-3FU
1. Keep pressing Button “M” for 3 seconds. Handset will display “S---”, then release pressing Button “M”
and press Button “M” again to enter, the code
“1Un”
will then appear.
2. Press button “Up”/“Down” to be
“3Fu”
. Then press button “M” to enter, this will display current upward
sensitivity level (L5). We have 9 levels of upward sensitivity, from L1 to L9, L1 is the most sensitivity, L9 is
the least sensitivity. L5 is our factory setting upward sensitivity.
3. Press button “Up”/“Down” to select your favorite upward sensitivity level, then press Button “M” to
preserve and quit, please wait for 2 seconds and it will display current height.
I. ADJUST DOWNWARD SENSITIVITY-4FD
1. Keep pressing Button “M” for 3 seconds. Handset will display “S---”, then release pressing Button “M”
and press Button “M” again to enter, the code
“1Un”
will then appear.
2. Press button “Up”/“Down” to be
“4Fd”
.
Then press button “M” to enter, this will display current upward sensitivity level (L5).
We have 9 levels of upward sensitivity, from L1 to L9, L1 is the most sensitivity, L9 is the least sensitivity.
L5 is our factory setting upward sensitivity.
3. Press button “Up”/”Down” to select your favourite upward sensitivity level, then press button “M” to
preserve and quit, please wait for 2 seconds and it will display current height.
J. ADJUST THE LOWEST HEIGHT DISPLAY
AND HEIGHT RANGE-5SH
1. Keep pressing Button “M” for 3 seconds. Handset will display “S---”, then release pressing Button “M”
and press Button “M” again to enter, the code
“1Un”
will then appear.
2. Press button “Up”/“Down” to be
“5SH”
, then press button “M” to enter, this will display , you also
can press button “Up”/“Down”, so that it will display and
.
: Mean to set the lowest position display height.
: Mean to set a new lowest position.
: Mean to set a new highest position
3. Press button “Up”/“Down” to be , then press button “M” to enter, will display current lowest
height, you can press button “Up”/“Down” to adjust the lowest height display, then press button “M” to
preserve and quit, please wait for 2 seconds and it will display new lowest height.
4. Press button “Up”/”Down” to be , then press button “M” to enter, will display current lowest
height, you can press button “Up” set a new lowest position, then press button “M” to preserve and quit,
please wait for 2 seconds and it will display height. New lowest position finished setting.
5. Press button “Up”/“Down” to be , then press button “M” to enter, will display current highest
height, you can press button “Down” to set a new highest position, then press button “M” to preserve
and quit, please wait for 2 seconds and it will display height. New highest position finished setting.
6. After setting, desk can only motion between new lowest position and new highest position.