Assembly Instructions / Turbochargers A131-R, A136-R
4 Installing the turbocharger / 4.3 Fitting the turbocharger with screws
© Copyright 2023 Turbo Systems Switzerland Ltd. All rights reserved.
HZTL455311P0044_EN
Rev. A
April 2023
Fig. 8: Mounting threaded rods with positioning sleeves
1.
Lightly oil the surfaces of the threaded rods (02) to be screwed in.
2. Insert positioning sleeves (07) into the bracket (optional) and screw the threaded rods into the
bracket with the aid of locknuts (01).
3. Remove nuts (01) again.
4.3
Fitting the turbocharger with screws
Fastening material, scope of delivery
The screws and positioning sleeves that are required for attaching the turbocharger to the bracket
are not included in the Accelleron scope of delivery.
Requirements for screws
Fig. 9: Requirement for screws
1)
Screws on bracket without positioning sleeves
2)
Screws on bracket with positioning sleeves
Product
Screw size
Material
DIN / ISO 898
(part 1)
Free length above bracket
L1 [mm]
A131-R
M16
10.9 / 12.9
195
A136-R
M20
10.9 / 12.9
225
Table 7: Screw requirements
Page
12
/
17
Summary of Contents for Turbocharger A131-R
Page 2: ......
