7085 NW 46
th
Street, Miami, FL 33166 - USA. Telephone: 305-8058533 Fax: 305-8058535
PI 3300 Page # 27
Figure 21: Additional Settings 2
In this screen (Figure 20), toggle the options (just one can be active at the time)
depending on the desired operation mode. The last option allow setting a delay to control
de bottom up movement, values are shown in seconds.
VIII.
PNEUMATIC FLOW CONTROLS
The extension and retraction speed for each pneumatic cylinder can be adjusted using the
flow controls installed on the machine. The flow controls determine the amount of air
coming in to or going out of the cylinders when they are activated. The standard model
machine comes with the following flow controls installed:
•
One flow control to regulate the discharge speed of the pistons is installed
between the piece PI3100-01-076E-0 and the oil tank (See Figure 22).
•
One flow control to regulate the charge speed of the pistons is installed over the
piece PI3100-01-076E-O (See Figure 22)
•
One flow control to regulate the speed of the nozzle cylinder going down (See
Figure 22)
•
One flow control to regulate the speed of the nozzle cylinder going up (See Figure
22)
