Chapter 3.
Set-up
(1)
Connect the connection tube on the vacuum outlet.
(2)
Connect the other side of connection tube on the suction container.
(3)
Hook up the container with the container connection base.
(4)
Connect either end of the suction tubing to the tubing connector then connect the other end to the
bacteria filter. Ensure that the clear side of the bacteria filter is toward elbow and container when
installing/re-installing. Do not reverse direction of filter
(5)
Please assure that all connections are secure and without leaks before using.
Chapter 4.
Operation Instruction
Front Panel
Device Operation
(1)
Open the device.
(2)
Adjust the pressure.
(3)
Verify that unit is at desired suction level before beginning.
(4)
Insert the suction tube to a suitable
depth in patient’s nostril patient suction
(5)
Close the device after use
Do Not Exceed 15 Seconds for Each Therapy
Do Not Block the Exhaust Outlet During Use
No Modification of this Equipment is Allowed
To Avoid the Risk of Electric Shock, this Equipment Must only be Connected to a Supply Mains with
Protective Earth
If the protect mechanism of the container triggered, turn off the device and disconnect the container
immediately.
