21
12-08. Adv Setup
Compare Firmware
5.1.8 Compare Firmware
Now press
ESC
and
▼
to enter the following figure. Compare Firmware is to compare the current
firmware version and the newly downloaded version. It can prove if the downloaded version is the
newest one.
12-09. Adv Setup
H/W Diagnostic
Press
ENT
to enter the next figure, and begin the LCD test. After that, the system will do the
button test, self-test of SDRAM, the hardware connection test and flash test. All test results will be
shown on LCD. It is the easiest way to know if the system can work well.
5.1.9 H/W Diagnostic
Now press
ESC
and
▼
to enter the following figure. H/W Diagnostic is to test the system
LCD Test Start
When all tests finishes, LCD will show the message as follows
Test finished
12-10. Adv Setup
Load Default
5.1.10 Load Default
Now press
ESC
and
▼
to enter the following figure. Load Default is to make all changed settings
return to defaults.
Press
ENT
to enter the next figure. Use
▲
▼
to confirm Yes or No.
Load Default
Config?Yes
When default loading finishes, LCD will show the results as follows.
Load Default
OK
ARS-2057/2050/2050P Manual
