background image

55

 AEC-7763LC/LD & ARS-2022/2022D

Press a Key to Eject Good Disc

... Press any ket to eject the good disc after copying

Press a Key to Eject Fail Disc

......Press any key to eject the failed disc after copying.

DVD-RW does not Support the Func

.......... DVD-RW doesn’t support this function.

Hold ESC to exit

................................ Press 

ESC

 for a second to terminate the test.

All data will be lost, erase?

.........All data on the disc will be lost. Confirm the

erasing of data.

Erase Finished

................................................ The erasing of data comes to an end.

No Eraseable Disc in DVD-RW!!

....The disc on the DVD-RW device is not rewritable.

2. Connecting with a HDD:

HDD not Format!

........................................The hard disk hasn’t been formatted yet.

Format HDD?

...........................................  Ask if you want to format the hard disk.

All data will be lost, format?

.......All data on the hard disk will be lost. Confirm the

formatting of hard disk.

Format HDD OK! 

........................The Formatting of hard disk has been completed.

Image load OK

.......... The image is successfully loaded from DVD to the hard disk.

Image load Fail

......The image isn’t successfully loaded from DVD to the hard disk.

HDD too small to handle image!

.........The hard disk hasn’t enough capacity to

store the data image (at least 5Gbytes).

No Valid HDD!

.................................................. The system cannot find a hard disk.

HDD too small

 .............................................. The capacity of hard disk is too small.

No Image in Partition xx

...............................There is no data image in partition xx.

Image Exists  Overwrite?

........There is a data image in the current partition. Confirm

the overwriting of data.

Delete Image in Partition xx?

....Confirm the deleting of data image in partition xx.

Partition Damage

...............................................................The partition is damaged.

Verify Disk or Partition?

..... Do you want to verify the hard disk or just a partition?

Summary of Contents for AEC-7763LC
































































Reviews:

Related manuals for AEC-7763LC