44
AEC-7763LC/LD & ARS-2022/2022D
Press
ENT
to enter the next figure. Use
▲ ▼
to confirm Disk or Parti.
Press
ENT
to verify. After verification LCD will show the results as follows.
5.12.6 Burn-in
On the above figure press
ESC
and
▼
to enter the following figure. Burn-in is to
simulate the copying progress many times. The time can be from 1 to 1000. After
each cycle of simulation, the DVD on the DVD writer will eject automatically and
recede for the next bout of simulation.
Press
ENT
to enter the next figure. Test is simply a simulation.
Verify Disk or
Partition? Disk
Verify Hard Disk
OK!
12-06. Adv Setup
Burn-in
Burn-in
Test
Press
ENT
and use
▲ ▼
to select the time of simulation such as 1, 2, 3...1000 or
Run Continuous. The figure below shows Run Continuous.
Sel burn-in num:
Run Continuous