Error Codes
Error Code Description
Error 100
Access code error, unrecognized access code.
Error 101
EEPROM error, unable to access memory. Please contact Acaia support.
Error 102
AD error, unable to access weighing signal. Please contact Acaia support.
Error 303
Unable to find acceptable starting zero point, most likely because the loadcell
has been damaged by excessive force or drop. Please contact Acaia support.
Overload: weight exceeds maximum capacity.
Underload: weight below minimum capacity.
Error 304
Calibration error. Calibration cannot proceed when environmental noises are too
strong. Please calibrate in a stable environment free of wind, vibration, etc.
Error 802
Unable to tare because the weight exceeds the acceptable tare range.
Error 803
Unable to tare because the weight is unstable.
Error 900
Passcode error (the default passcode is 0000)
Display Code Description
UPdAtE
The scale is in update mode. During the update process, the data transfer
indicator on the bottom left will flash.
* Note: If you want to leave update mode, please connect the scale’s USB to a
power source. The scale will power off automatically if the update process does
not begin shortly.
Other
16
