38
4-6. Unloading the helicopter from the T1H2 tug
1. Put the optional air bag under the tail or position a person at the tail to ensure it doesn’t
drop too low and hit the ground.
2. When you are ready to unload the helicopter just move the “Engage/Lock” switch from
the “Lock” position to the “Engage” position on the remote
3. Slowly move the tug backward and visually check that the rollers on both sides are en-
gaged and rolling. If they are not rolling then stop and slowly move forward and back-
ward a few times until they are engaged.
4. When the rollers are engaged then just slowly back the tug out from under the skids.
Air Bag
Figure 3-1