abyzz AFC400, User Manual

Page: 9 / 30

!
Application and general instructions
The product is suitable for moving liquids (seawater, fresh water,
brackish water, chlorine water and other liquids which are not
aggressive to the components of the pump) with a temperature of +
2 ° C to + 35° C. A list of the parts that come into contact with the
medium to be conveyed can be found in the appendix, for non or
the like. Please ensure the compatibility with the specified components before use.
The product can promote both clear and polluted water up to a particle size of
5mm. For use in the dirty water, regular cleaning and the use of a pre-filter are
required to protect the pump. In this case, the internal flushing channel must be
cleaned. Abrasive components increase wear - damage is not covered by the
warranty.
The pump must always be installed below the water level.
Please observe the generally applicable national and international regulations
during installation.
The maximum working pressure must not exceed 1.2 bar.
Before storage, the product must be thoroughly cleaned with fresh water and
suitable cleaning agents (e.g., vinegar), otherwise residue may settle in the pump.
When using, please ensure that the suction channel is adequately protected,
otherwise animals or objects enter the pump, thus avoiding damage.
! 9