ABX Pentra 80 RAB108EA, User Manual

Page: 172 / 306

Pentra 80
5–20
Pentra 80 - User Manual - RAB108EA
5.3.1. RS232 settings tab:
Tab. 5–5: RS 232 settings
In ABX format, the length is always 8 bits
In ASTM format, the length can be 7 or 8 bits, but the protocol is BIDIR.
5.3.2. ABX/ASTM format tab
The ABX Format allows the transmitted data batches to be variable in size. This variable size
allows the transmission of Histograms, Thresholds, and 5-DIFF matrixes as shown on the
system.
ASTM format: Refer to ASTM standard documentation
The RS232 settings tab can be modified according to the selections chosen by the operator
(see
5.3.1. RS232 settings tab:, page 5-20).
Heading/key Function Default value
Bauds speed selection 9600
Parity parity selection None
Protocol Protocol selection Xon/Xoff
Format
Selection of protocol format between P80 &
host (ABX format or ASTM format)
None
Mode
communications in both directions or from
the P80 to the host
ABX/BIDIR
Max time
time out (in seconds) before automatic
deconnection
80
Response time time out (in seconds) for the reception 15
Soh/Soh conflict
Time Out before new Soh when there is a
Soh/Soh conflict
2
Automatic disconnect Automatic disconnection Unchecked
Send Quality Control
Result
Does the Qc analysis send to the host? Unchecked
Send Within Run Result
Does the Within Run analysis send to the
host?
Unchecked
Send StartUp Result Does the Blank analysis send to the host? Unchecked