The
Subnet Mask
is a network segment where IP addresses with
identical network addresses are used. The standard value here is
usually 255.255.255.0.
To determine the value for the
Default Gateway
, use one of the
computers connected to the network with Windows. Call up “Run”
in the start menu. Enter “cmd” in the new window, then “ipconfig”
in the prompt which follows. Enter the default gateway value in
the recorder screen.
The
DNS Server
translates an Internet address into an IP ad-
dress. Enter the default gateway value under
Preferred
DNS
Server
.
Click
Apply
. Exit the screen by pressing
OK
, then click on
Next
.
The first three positions of the
IP Address
must correspond to the
default gateway value. The last position specifies the device acti
-
vated through the default gateway (e.g. the recorder), and is defined
individually for each device. For example, enter xxx.xxx.xxx.50 for
recorder 50. Do not assign an IP address more than once.
The
MAC Address
indicates the unique hardware identification
number of the recorder. Further settings can be made on the
Advanced
tab. An overview of the settings can be found under
Network Status
.
Click
Apply
. Exit the screen by pressing
OK
, then click on
Next
.
Click
Done
. The recorder has now been set up and can now be
used for recording. Further information on the recorder can be
found in the manual.
34
33
35
31
30
32
MA-4101-002-Bedienungsanleitung-TVTVVR60000.indb 27
16.09.2010 11:23:14
