Important safety information
9
Warning
Never open the device on your own! There is a
risk of electric shocks!
If it is necessary to open the device, consult
trained personnel or your local maintenance spe-
cialist.
Overloading / overvoltage
•
Avoid overloading of mains sockets, extension cables
and adapters as this can result in fires or electric
shocks.
•
Use overvoltage protection to prevent damages
caused by overvoltage (e.g. electrical storms).
Cables
•
Always hold cables by the connector, and do not pull
the cable itself.
•
Never touch the mains cable with wet hands, as this
can lead to a short circuit or electric shock.
•
Never knot the cable, and do not tie it to other cables.
•
All cables should be laid so that they cannot be
stepped on or cause an obstruction.
•
A damaged mains cable can cause a fire or electric
shock. Check the mains cable from time to time.
•
Never modify or manipulate the mains cable or plug.
•
Do not use plug adapters or extension cables that do
not conform to the applicable safety standards, and
do not make alterations to power supply cables or
mains cables.
Installation location/operating environment
•
Position the device on a firm, level surface and do not
place any heavy objects on the device.
•
The device is not designed for operation in rooms
subject to high temperatures or moisture (e.g. bath-
rooms), or in excessively dusty rooms.
•
Operating temperature:
5 °C to 35 °C. The device may only be operated in
moderate climate conditions.
Ensure the following:
•
The device must not be exposed to direct heat
sources (e.g. heaters);
•
The device must not be exposed to direct sunlight or
strong artificial light;
•
The device must not be placed in close proximity to
magnetic fields (e.g. loudspeakers);
•
Naked flames (e.g. candles) must not be placed on or
near the device;
•
Contact with spraying or dripping water and aggres-
sive liquids must be avoided;
•
The device must not be operated in close proximity to
water, and must not be submerged under any cir-
cumstances (do not place objects containing water on
or near the device, such as vases or drinks);
•
Foreign objects must not penetrate the device;
•
The device must not be exposed to strong variations
in temperature, as this can lead to condensation and
electrical short circuits.
•
The device must not be exposed to excessive jolts or
vibrations.
