21
Change user
To change the settings for a user, first select a user and then click on the "Change"
icon.
The following changes can be made:
•
Username
•
Password
•
User authorisation
Delete user
To delete a user, first select a user and then click on the "Delete" icon.
NTP (Simple Mode)
The menu is available in simple mode (switchover via control bar at the top right).
The Network Time Protocol (NTP) is used for automatic time synchronisation via the
network or Internet.
Exception (Simple Mode)
Specific alarms can be set for certain exception conditions. The following exceptions
can be monitored.
•
HDD (hard disk drive) full
•
HDD (hard disk drive) error
•
Network disconnected
•
IP conflict
•
Illegal registration
•
Recording errors
The following alarms can occur due to exceptional conditions:
•
Audio warning (buzzer, local on unit)
•
Notify CMS
•
Send e-mail
Activate
Here you activate the NTP function on the recorder
Interval (min.)
Here you select the interval for synchronisation
NTP Server
Enter the IP address of the NTP server here.
NPT port
Enter the port of the NTP server here.
