52
Motion Detection
Enable Motion Detection:
The motion detection functions are activated by checking this box.
Zone Settings:
First press “Start Draw”. Click the left mouse button, then select the zones for
motion detection by dragging the cursor over one or more areas. Press “Stop
Draw”.
Sensitivity:
The sensitivity is used as a global setting for all frames.
Linkage:
The settings for e-mail notification in the event of motion detection are made
here. Check the box to activate e-mail notification (before doing this, enter the
necessary data for the e-mail settings).
Accept the settings by pressing “Save”.
Text Overlay
OSD Text:
Up to four texts can be displayed by checking the box.
Text Information:
Displayed text (may be max. 44 characters long).
XPosition:
Position on the X-axis (max. 704).
YPosition:
Position on the Y-axis (max. 576).
Accept the settings by pressing “Save”.
6.3 Network
Network Setting
IP Address:
Manual setting of the IP address for the IP camera.
Device Port:
Communication port on the IP camera.
Subnet mask:
Manual setting of the subnet mask for the IP camera.
Gateway (Default router):
Manual setting of the default gateway for the IP camera.
DNS Server:
Server address used where the camera attempts to convert the DNS names
into IP addresses.
HTTP Port:
Port for displaying the web interface of the IP camera in the browser.
Accept the settings by pressing “Save”. If the network configuration is changed,
then the camera must be restarted (System\Management\Restart).
