Abus TVHD80120, Quick Manual

Page: 12 / 58

23 22
English English
Connections
USB ports
For external USB 2.0 devices
(e.g. mouse or external disk drive)
Camera selection keys
White: Camera is connected
Blue: Connected camera is recording
Not lit: No camera connected
Directional keypad
Press and hold the OK key
for five seconds to turn the
recorder on or off
Jog Shuttle
Inner ring: Single frame playback
Outer ring: Change the playback speed
IR receiver
Receiver for the remote
control signal
Status LED
Displays the operating
state of the recorder
Recorder operating keys
Function keys for operating
the recorder
AUDIO IN
Cinch inputs
AUDIO OUT
Cinch audio output (synchronised
with main video signal output)
VGA
VGA monitor connection
(9-pin), video output signal
RS-232
Serial port – no
functionality
eSATA
Connection for an
external HDD
ALARM IN / OUT
RS-485 connection for PTZ cameras, max.
16 alarm inputs, max. 4 relay outputs
HDMI
HDMI monitor connection
USB
Connection for
USB devices
VIDEO OUT
BNC connector for video output (used for connecting
a monitor as an alternative to the VGA / HDMI output)
LAN
RJ45 connection for a
network connection
Power on/off
On/Off switch
Mains power connection
100-240 V AC, 50-60Hz
VIDEO IN
BNC input for
HD-SDI cameras
LINE IN
Cinch audio input (is not
recorded, only for network
transmission)
VIDEO IN VIDEO IN
11 22 33 44
VIDEO IN VIDEO IN
AUDIO OUT AUDIO OUT
AUDIO
IN
HD-SDI
VIDEO OUT VIDEO OUT
RS-232 RS-232
HDMI HDMI VGA VGA LAN1 LAN1 IN IN
OUT OUT
ALARMALARM
eSATA eSATA
LINE IN LINE IN