Abus TV8239, Installation Manual

Page: 26 / 76

26
Notes:
• If a camera is disconnected, this channel is automatically skipped in the sequencing.
•
If no sequence is selected in AUTO SEQUENCE MODE, “NO SEQUENCE SETTING” appears on the
screen and you hear an alarm tone.
DWELL TIME: Sets the dwell time for the respective position of the sequence.
Notes:
• If all dwell times in AUTO SQUENCE MODE are 0, “NO SEQUENCE SETTING” appears on the screen
and you hear an alarm tone.
• If no sequence and no dwell time are selected in AUTO SEQUENCE MODE, “SEQUENCE SETTING
ERROR” appears on the screen and you hear an alarm tone.
Screen settings
Fig. 3
BRIGHT: Sets the brightness for cameras 1~4 (CH1~CH4). You can select values from 0 to 99.
CONTRAST: Sets the contrast for cameras 1~4 (CH1~CH4). You can select values from 0 to 99.
HUE: Sets the colour hue for cameras 1~4 (CH1~CH4). You can select values from 0 to 99.
CH1: CH2:
BRIGHT
64 BRIGHT 64
CONTRAST 64 CONTRAST 64
HUE 80 HUE 80
CH3: CH4:
BRIGHT 64 BRIGHT 64
CONTRAST 64 CONTRAST 64
HUE 80 HUE 80