Abus TV7230, Installation Instructions Manual

Page: 98 / 272

29
Picture settings
Click “
Image settings ” to open another window in which you can set the “Brightness”, “Contrast”,
“Saturation” and the “Sharpness” of the video picture. To check your settings, click “ Preview ”. To save
the picture parameters, click “ Save ”. To discard your changes, click “ Restore ”.
“White balance” Set the value for an optimal colour hue.
Audio settings
“
Mute ” Deactivation of the microphone inside the camera.
“Audio settings” Select the audio type and a bit rate.
“AAC” (Advanced Audio Coding) Special codec for audio data compression under MPEG4.
“GSM-AMR” (Global System for Mobile Communications – Adaptive Multi Rate) Voice codec
in GSM mobile telephone network.
Camera Control
On the camera control page, there are two main function control areas:
Camera control area
The pan and tilt functions can be controlled with these buttons. The “Left” button aims the camera to
the left; the “Right”, “Up” and “Down” buttons aim the camera accordingly. The “Home” button aims the
camera to the center.
“
Pan speed ” This controls the range of the horizontal movement of the camera. The greater the value,
the greater angular movement when performing the “Left” or “Right” functions would be.
“
Tilt speed ” This controls the range of the vertical movement of the camera. The greater the value, the
greater angular movement when performing the “Up” and “Down” functions would be.
“
Auto pan/patrol speed ” This defines the speed of panning and patrol, the greater the value, the
faster the speed.