Abus TV7230, Installation Instructions Manual

Page: 90 / 272

21
Network
All changes made on this page cause a system reboot so that they can take effect. Make sure that the
fields are correctly filled before you click “
Save ”.
Network connection
“LAN” The default is LAN. Use this setting if the camera is connected to a LAN. You also have to
make other settings such as the IP address or the subnet mask.
“PPPoE” Use this setting if the camera is connected directly to a DSL modem. You will receive a user
name and password from your ISP (Internet Service Provider).
“Get IP address automatically” At every restart of the PAN/TILT network camera, an IP address is
assigned.
“Use fixed IP address” The network data such as the IP address is defined here.
“IP address” This is needed for network identification.
“Subnet mask” Defines whether the destination is in the same subnet. The default value is
“255.255.255.0”.
“Default router” Gateway for transmitting data to another subnet. An invalid router setting prevents
transmission to these destinations in different subnets. For a Cross link connection from the camera to
the PC you have to type in an IP address in the same subnet (e.g. 192.168.0.1)
“Primary DNS” Server of the primary domain name with which the hostnames are converted into IP
addresses.
“Secondary DNS” Server of the secondary domain name for generating a reserve copy of the
primary DNS.
“Enable UPnP presentation” This enables Universal Plug and Play. This is an extension of the PnP
standard to network environments.
“Enable UPnP port forwarding” This enables Universal Plug and Play port forwarding for network
services.
“
PPPoE ” If using the PPPoE interface, fill in the following settings from ISP: user name, password,
password confirmation
HTTP:
“
HTTP port ” This port can be different from the standard port 80 (80; or 1025 to 65535). If this port is
changed, users must be informed to ensure a successful connection. Example: If the administrator
changes the HTTP port of the PAN/TILT network camera with the IP address 192.168.0.99 from 80 to
8080, users have to enter “http://192.168.0.99:8080” in the web browser instead of
“http://192.168.0.99”.
“
Secundary HTTP Port ” HTTP Port for stream 2
“ Access name for stream 1 ” Access name for the MJPEG stream 1
“ Access name for stream 2 ” Access name for the MJPEG stream 1
FTP:
„
FTP-Port “ This is the internal FTP server port. This can be another than port 21 (21, or 1025 to
65535).