Abus Smartvest FUMK35000, User Manual

Page: 90 / 127

26
English
FUBW35000 PIR Motion Detector
The motion detector is only suitable for indoor use. For further information, please refer to the safety
instructions relating to installation location and operating environment.
General installation instructions

Install the motion detector 2
–2.5 m above the ground for a range of 12 m.

Install the detector either flush to the wall or in a corner (recommended).

Do not install the motion detector opposite heat sources or windows, above a radiator, close to
large metallic structures, close to power cables or gas lines, close to electronic or wireless
equipment, or closer than 30 mm to the ceiling.

The detector's detection range is directed downwards. For this reason, do not tilt the detector too
sharply downwards, as otherwise the range will be restricted. A horizontal, upright position is
recommended.
Adhesive installation
1. For wall installation, stick the adhesive pads provided on to the rear of the motion detector.
2. For corner installation, stick the adhesive pads on to the motion detector's chamfers (angled
surfaces).
3. Install the motion detector in the desired installation location on a flat surface.