background image

 

English 

 

Appropriate use 

Use  the  device  exclusively  for  the  purpose  for  which  it  was  built  and  designed!  Any  other  use  is 
considered improper! 

Damage caused by disregarding these safety instructions invalidates the warranty. We assume 
no liability for consequential damage! 

 

Unpacking 

While  unpacking  the  device,  handle  it  with  extreme  care.  Packaging  and  packing  materials  are 
recyclable and should always be recycled. 

If the original packaging is damaged, first check the device. If the unit is damaged, return it with 
the packaging and inform the delivery service. 

 

 

Please  ensure  that  the  packaging  contains  the  DSK  (Device  Specific  Key)  card. 
This card shows the DSK of your ABUS Z-Wave device. Please store it in a safe 
place. Every S2 (Security 2) certified Z-Wave controller requires the DSK to include 
(teach-in) the device. 

 

Installation site Operating environment 

Do  not  place  any  heavy  objects  on  the  unit.  The  unit  is  only  designed  for  operation  in  rooms  with 
appropriate temperature or humidity (e.g. bathrooms) or excessive dust. For exact specifications, check 
the technical data of the individual units. Ensure that there is always sufficient ventilation, that no direct 
heat sources act on the unit, that no direct sunlight or strong artificial light falls on indoor units, that the 
unit is not in the immediate vicinity of magnetic fields (e.g. speakers), that no open fire sources (e.g. In 
particular, the device must never be submerged (do not place objects filled with liquids, e.g. vases or 
drinks on or next to the device), no foreign objects may enter the device, the device must not be exposed 
to  strong  temperature  fluctuations,  as  otherwise  humidity  can  condense  and  lead  to  electrical  short 
circuits, the device must not be exposed to excessive shocks and vibrations. 

 

Children 

Do not allow electrical devices to get into the hands of children! Never allow children to use electrical 
equipment unsupervised. Children are not always able to recognize possible dangers correctly. Small 
parts can be life-threatening if swallowed. Also keep the packaging films away from children. There is 
a danger of suffocation! This device should not be left in the hands of children. Springy parts can jump 
out if used improperly and cause injury (e.g. to eyes) to children. 

 

 

Summary of Contents for Nexello PLMK10100




















Reviews: