105
First set up the second unit in the network and configure all basic functions
(date, storage drives, etc.).
Now select the hot spare mode for this unit in the "Hot Spare" menu.
The
recorder must be restarted for this. Follow the instructions.
Make a note of the IP address of the hot spare unit.
4.
on your primary recorder, also go to the Hot Spare menu and select "Primary
Mode" as an option and activate the function.
Enter the IP address and password of the hot spare unit.
A
permanent connection is now established between the primary and hot spare
unit.
7.
the set up is completed
To apply the settings, confirm your entries with Apply.
Note
When the hot spare mode is activated, the recorder can only be used in a limited
way. Only basic configurations are available in the settings menu.
10) Maintenance
settings
In this menu you can, among other things, export and import important status
information as well as configuration data and reset the recorder to factory settings.
System info
This menu displays various information about the system, cameras, recording, alarm,
network and storage media.
Logbook
