Abus HDCC72510, User Manual

Page: 33 / 132

33
English
WDR BRIGHT (0~60): Move basic setting on a brightness scale
WDR OFFSET (0~60): Change basic gain factor
BLC Backlight compensation. The function displays light areas of the video image
darker, whilst maintaining the brightness of dark areas.
GAIN (LOW/MEDIUM/HIGH):
Intensity of the function
AREA (POSITION/SIZE): Setting of the reference area for the
calculation. Press ENTER to change the
position with the control buttons. Press ENTER
again to change the size with the control
buttons.
STANDARD: Press ENTER to reset all parameters of the
BLC function to the factory settings.
HSBLC This function marks areas above a certain brightness level black. This function
may be used, for example, solely at night for oncoming vehicle headlights. In
this case, the headlights will be marked black. The registration plates next to the
headlights will then be more easily identifiable.
SELECTION (AREA 1~4): Selection of one of max. four areas. The function is
applied in this area.
DISPLAY (ON/OFF): Activate/deactivate the area. Press ENTER once
or twice to adjust the position and size with the
control buttons.
LEVEL (0~100): Brightness threshold over which a pixel is marked black.
MODE (PERMANENT/NIGHT-TIME ONLY):
Permanent activation of the
function or only when in night mode
MASKING (ON/OFF): Activate or deactivate all areas.
STANDARD: Press ENTER to reset all parameters of the
HSBLC function to the factory settings.
RETURN Return to previous menu screen
WHITE BALANCE
Function Description
ATW Auto tracking white balance
White balance is performed by the camera automatically and continuously
updated.
AWC -> SET With this function, white balance is performed once after pressing the ENTER
button and stored permanently.
MANUAL Manual setting of the white balance
BLUE (0~100): Proportion of blue in video image
RED (0~100): Proportion of red in video image
RETURN Return to previous menu screen
DAY&NIGHT
Function Description
EXTERN. The day/night switching (ICR/IR) is controlled by the photo sensor integrated
into the camera (switching threshold: 5–15 Lux)
IR LED (ON/OFF): The integrated IR LEDs can be deactivated in night mode if
required.