Installation
31 |
EN
Step 6: Test the system
Test the system fully.
Signal strength
Signal strength of the repeater on the alarm panel
Installer mode > Test > Signal strengths > RF repeater
Signal strength of the alarm panel and components on the repeater
Installer mode > Test > Signal strengths > RF repeater components
Select the corresponding repeater. A list of all possible components will appear. After select-
ing a component, you will see its signal strength on the repeater.
Repeat alarm panel
Repeat detectors
Repeat wireless control panel
Repeat outdoor sirens
Repeat indoor sirens
Repeat door locks
For more details, please refer to the corresponding instructions of the alarm panel or wire-
less extension.
Signal strength of the components on the alarm panel
Installer mode > Test > Signal strengths
Select the desired component. You will see two columns for the components which are be-
ing repeated.
The right column shows the original signal from the component to the alarm panel.
The left column shows the repeated signal strength from the repeater to the alarm panel.
For more details, please refer to the corresponding instructions of the alarm panel or wireless
extension.
Exit installer mode on the alarm panel. The system is now ready.
