Installation
28 |
EN
Step 3: Fix the repeater to the wall
Note
A moulded piece in the recess of the backplate (point 4 Figure 3) serves as an anti-
removal wall contact. This moulded piece is fixed to the wall with a screw.
If this is not done, tamper detection for the wall is deactivated.
Danger
If the moulded piece is not fixed to the wall, the repeater will lose its certification for
security level 2.
Figure 8
Place the repeater on the wall and align it vertically. Mark the three fixing points.
Drill the holes in the wall to fit the diameter of the screw anchors. Insert the screw anchors
supplied, in the holes.
Insert the supplied screws through the repeater’s fixing holes. Turn the screws in the screw
anchors. Do not tighten the screws yet. Vertically align the RF repeater once more. Now
tighten the screws.
