User Operation Guide
PROGRAMMING MODE
PROGRAMMING MODE
Clock setting
Check on Use PC Time to set time in 12 or 24 hour format with reference to PC time or
manually.
Auto Timer Off and Reset
Auto Time Off function will set the control to shut down when time up.
Example: After 8pm, system will auto shut down that is Turn off Projector, Turn off AV Switcher
and keep Projection Screen back home position or depending on the Macros setup.
Reset Timer This allow Reset of Panel Lock Function when Auto Timer Off is set with
Panel Lock enabled.
Panel Lock
This acts as a simple Panel Lock which disable all function and control on controller, prevent
miss handling or miss used of AV Projection System controlled.
Check enable to enable with a simple selection of either two or three buttons combination
as activation. After which, Panel Lock and then be ON and Off by press and hold the
selected two or three buttons combination at the same time for 3 to 5 min.
1.5 Relays Tab
This allows configuration of Relays digital I/O for controlling of [projection screen in
conjunction with ABtUS screen controller AVS-SSR8V2.
1.6 Timers/Misc
This allows system time to be set manually or base on programming PC time in 12 or
24 hour format as well as Auto Timer Off with Panel Lock and Reset after time out.
