Absolent Air Care Filtermist FX Series, User Manual & Log Book

Page: 13 / 36

13
Maintenance
Filtermist can provide a full service and maintenance package to ensure that your Filtermist unit is working to its
optimum efficiency. Please contact the office (Tel: 01952 290500 )
Should you wish to carry out maintenance yourself then always ensure you use genuine Filtermist spares.
Guidelines on how to carry out maintenance are shown below.
Maintenance should be carried out in accordance with the following guidelines.
Failure to carry out maintenance could result in insufficient extraction from the machine and a deterioration of
efficiency. Certain applications, e.g. grinding or cast iron machining, should be checked and maintained on a
more regular basis, according to duty.
As well as scheduled maintenance requirements, daily, weekly and monthly checks are also recommended. These
are listed in the log book provided with each unit.
"EEJUJPOBMDPQJFTDBOCFSFRVFTUFECZDPOUBDUJOHPVSPGGJDF
Maintenance requirements are covered by two schedules:-
• 1000-hour Service - Parts required for the 1000 hour service are provided in a Filter Kit – see page 18 & 19
• 2000-hour Service - Parts required for the 2000 hour service are provided in a Service Kit – see page 18 & 19
Isolator
If requested, the unit may be supplied with an isolator switch complete with motor protection overload.
The overload starter is changeable to suit different sized units or voltage. Contact Filtermist for more details
(Tel 01952 290500). If not requested, the motors must be connected via a direct – on – line starter and isolator
with suitable thermal overloads or via an independent supply from control panel. Machine must be provided
with a clearly identified, readily accessible electrical isolation point providing all-pole disconnection which has
the facility for lock-off (e.g. between 0.60 and 1.7m above the working surface).
Maintenance Information