Basic information for a safety operation of a rc model car.
Dear customer,
thank you that you have chosen a high-performance product from
Absima. Our products have been designed for beginners, hobby pilots
and competition ambitious drivers. Absima / Team C wants you to
have fun and success with your new model and we therefore
recommend that you read the following points carefully.
Before each driving:
Please check all screws are properly fitting.
For screws which abut on metal, you should check whether there is enough
security screws paint.
The servo saver should always be set so that it works smoothly and is not too
tight otherwise the servo gets damaged.
Check on your remote control and the vehicle the batteries whether these are still
fully charged.
Check on your remote control, the
TRIM
settings that the wheels are straight and
that you have enough steering angle.
After each driving:
If you have driven in dirty terrain, it is advisable to clean the completely car.
If you are driving through rain or water you have to dry the entire vehicle,
otherwise all metal parts will rust. To displace moisture is
WD40
just right.
After several trips we recommend that you check the bearings if they are still
functioning properly.
After several trips we recommend that you check out the differentials in the
vehicle.
General visual check after every ride
