PAGE 2
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: CYC4560 CYCLONE KIT 31/05/13
ASSEMBLY INSTRUCTIONS
CYC4560 CYCLONE KIT
GENERAL INSTRUCTIONS
A NOTE ON SAFETY
Before commencing any assembly, read through these instructions in
detail to gain a thorough understanding of assembly methods and
associated details.
Unpack the carton and carefully identify and check off all the parts
against the parts described and illustrated on pages three and four.
Some parts may have sharp edges. It is advisable to wear gloves when
handling these items and safety glasses if drilling holes. Sensible shoes
are highly recommended.
It is highly recommended to install the cyclone kit the shed with two or
more people.
TOOLS REQUIRED
3mm
4mm
10mm
10mm Masonary
CYCLONE BRACING
THE BRACING MATERIAL SUPPLIED IS 80mm x 40mm GALVANISED STEEL CHANNEL, SIMILAR TO THAT
USED IN STEEL HOUSE FRAMING. SOME CHANNELS WILL BE REQUIRED TO BE CUT TO SPECIFIC LENGTHS
USING A HACKSAW.
HORIZONTAL WALL CHANNELS ARE BOXED SECTIONS SUPPLIED AT 2910mm. TO ACHIEVE A LONGER
LENGTH EG. 2980mm SLIDE THE TWO BOXED SECTIONS IN OPPOSITE DIRECTIONS TO ACHIEVE THE
REQUIRED LENGTH, REFER TO PAGE 14.
FOR CONNECTING THE CHANNELS TO EXISTING CENTRE PORTAL FRAMES AND EXISTING GABLE DOOR
END FRAMEWORK, USE THE SPECIAL MULTI PURPOSE BRACKETS AND SELF DRILLING TEK SCREWS
SUPPLIED
