PAGE 15
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: CYC4560 CYCLONE KIT 31/05/13
ASSEMBLY INSTRUCTIONS
CYC4560 CYCLONE KIT
CYCLONE KIT ASSEMBLY - FRONT WALL RE-INFORCING
HELPFUL HINTS: CUT TWO LENGTHS OF WOOD AT 870mm AND USE THEM AS POSITIONAL TEMPLATES
FOR YOUR HORIZONTAL BRACES. THIS MAKES INSTALLATION MUCH SIMPLER AND MORE EFFECTIVE.
THIS METHOD CAN ALSO BE USED TO BOX THE CHANNEL SECTIONS. PLACE COMBINED CHANNELS IN
POSITION AND MARK SCREW HOLES AT EVERY SECOND CORRUGATION.
STARTING AT THE FRONT OF THE SHED PLACE A HORIZONTAL BOXED SECTION AT 870mm HEIGHT AND
TEK SCREW INTO POSITION AS SHOWN BELOW.
ENSURE BOXED SECTION IS PUSHED FIRMLY AGAINS THE SIDEWALL OF THE SHED. THIS WILL ALLOW
THE DOOR STUD TO BE INSTALLED LATER..
C2910 L = 2910mm
