Absco Industries
Assembly Instruction Manual
ABSCO SKILLION CARPORT
MODEL: CPSN2
3.00mW x 5.50mD x 2.37mH
Model: CPSN2
24/11/22
7
EDGE BEAM ASSEMBLY
Secure the edge beams
together at each corner
using the joiner angles as
shown.
ZACO129
ZACO130
FRONT
Side Beams - 5500 mm long
End Beam - 3000 mm long
The joiner angles should be positioned on the
inside of the edge beams.
ZACO129 goes to the tall side and ZACO130 the
short side.
Hold with ‘G’ clamps and fastened with tek
screws from the outside of the edge beams.
Also fasten the bottom overlap with three tek
screws.
Seal all joints with water proof sealant such as
silicone as these beams are an internal gutter
system.
The overall dimension of the assembled edge
beams joined should be 3000 x 5490 mm
ZACO
114
ZACO
114
