background image

AUSTRALIA PRODUCT WARRANTY AGAINST DEFECTS

Congratulations on your purchase of an ABSCO SHED

ABSCO SHEDS, including garden sheds, garden beds, aviaries, storage units, garages, awnings and carports are made using

high quality Australian made steel.

We are pleased to advise we warrant that the steel coating will not rust, crack, flake peel or blister for 30 years from date of

purchase, when installed within Australia.

This warranty does not apply to surface deterioration of panels caused by 'Swarf” (Tiny particles of steel debris left from cutting,

grinding or drilling operations) that has not been removed after building construction, or as a result of contact with damp soil,

chemicals, fertilisers or other corrosive substances.

This warranty covers any Absco product used for normal domestic use and installed in accordance with the installation

instructions. The warranty does NOT cover Damage caused by storms, wind, rain snow or poor foundations.

This warranty does NOT cover ABSCO products installed in severe coastal, industrial or other highly corrosive environments. The

warranty does not cover fasteners (screws, nuts, bolts, rivets, hasps or sliding padbolts).

The warranty is limited to replacement and delivery of components and does not include any labour or installation costs. The

benefits given by the warranty are in addition to your other rights and remedies under a law in relation to the goods or services

to which the warranty relates.

The warranty applies to the exclusion of all other representations, guarantees or warranties express or implied, our goods come

with guarantees that cannot be excluded under the Australian consumer law and is not transferable. You are entitled to a

replacement or refund for a major failure and for compensation for any other foreseeable loss or damage. You are also entitled

to have the goods repaired or replaced if the goods fail to be of an acceptable quality and the failure does not amount to a

major failure. For further information go to 

http://www.consumerlaw.gov.au

.

Please retain a proof of purchase (sales docket or invoice) or register your warranty within 30 days of purchase here:

www.absco.com.au/register_warranty.php

In the unlikely event a warranty claim is made, it must be supported by photographic evidence and details of the defect,

including component part numbers, together with proof of purchase documentation (or on-line registration of purchase) and

forwarded to the address below. Upon receipt of the warranty claim, the Customer Service Manager will contact you within

three business days to advise you of the assessment outcome of the claim, which may include your expenses incurred in making

the claim.

THE CUSTOMER SERVICE MANAGER, ABSCO INDUSTRIES, PO BOX 119 ACACIA RIDGE QLD AUSTRALIA 4110

PHONE: 1800 029701   FAX: 07-33441191   EMAIL: 

[email protected]

Issued 01 January 2013

ABSCO INDUSTRIES

ASSEMBLY INSTRUCTION MANUAL

AVIARY MODEL: A30231GK 

06-02-2018  

      

Absco Industries

Aviary Model: A30231GK

PAGE 27

Summary of Contents for A30231GK





























Reviews: