Absco Industries
Assembly Instruction Manual
ABSCO WORKSHOP SHED
MODEL: 60303WK
20’W x 10’D x 7’H
Model: 60303WK-PTX
2/03/2023
18
Australian Made
To make the total span we must now join sections of sheeting together for the roof and wall.
Refer to the panel construction section of this instruction set for further details and ensure that the
assembled panels are not joined together with pre-punched holes incorrectly positioned.
The overall length of each panel is the same as the ridge beam.
Trim the channels by ²¹/₃₂” to allow the
sheets to be overlapped.
Overlap the panels and fasten as
shown.
²¹/₃₂”
²¹/₃₂”
It is not critical that the overall dimension is exact but try and make sure the length is within ¹³/₆₄”.
JOINING WALL AND ROOF PANELS
Ridge beam and panel length = 117.83”
Length to be cut off = ²¹/₃₂”
New length = 117.19”
Both panels joined = 117.19” x 2 = 234.37”