Absco Industries
Assembly Instruction Manual
ABSCO BIN COVER
MODEL: 1508WBCK
1.52m W x 0.78m D x 1.15m H
Model: 1508WBCK
2.1
18
15/09/2022
FINAL CONSTRUCTION
LOCATION OF 4
CONCRETE
ANCHORS
FAST052
HASP
FAST052
LATCH
TIP: TIE A STRAP OR CORD THROUGH THE FAST062 SADDLE
ONTO YOUR WHEELIE BIN HANDLES TO CREATE A ONE-LIFT
LID OPENING FEATURE
DYNABOLT
BOLT & NUT
STEEL
ANGLE
SLAB
WALL
SHEET
INSIDE VIEW
ATTACH HASP TO BOTTOM CHANNEL TO KEEP
DOOR.
NOTE: IF RAMP ACCESSORY IS BEING USED DO
NOT FIT THIS HASP.
INSTEAD DRILL A 10mm HOLE WHERE THE BOLT
STRIKES THE RAMP.
• EACH ANCHOR CONSISTS ON ONE NUT, BOLT,
DYNABOLT AND STEEL ANGLE
• DRILL A 10mm HOLE INTO THE WALL SHEET.
• DRILL A 10mm HOLE INTO THE CONCRETE SLAB
• POSITION THE STEEL ANGLE
• PLACE THE DYNABOLT INTO THE CONCRETE
HOLE & TIGHTEN
• SECURE THE STEEL ANGLE TO THE WALL SHEET
USING THE NUT & BOLT
• REPEAT FOR EACH ANCHOR LOCATION
