EN
OPERATING INSTRUCTIONS
AB-CPEXPERT
9
GENERAL SAFETY RULES
WARNING! Read all instructions. Failure to follow all instructions
The term “power tool” in all the warnings listed below refers to your
mains operated (corded) power tool or battery operated (cordless)
power tool.
SAVE THESE INSTRUCTIONS
WORK AREA
a) Keep work area clean and well lit.
Cluttered and dark areas
incite accidents.
b) Do not operate power tools in explosive atmospheres,
dust.
Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a
power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools.
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There
is an increased risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts.
Damaged or
entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use.
Use of a cord suitable for
outdoor use reduces the risk of electric shock.
PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
alcohol or medication.
A moment of inattention while
operating power tools may result in serious personal injury.
b) Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for appropriate conditions
will reduce personal injuries.
c)
position before plugging in.
Carrying power tools with your
switch on invites accidents.
d) Remove any adjusting key or wrench before turning the
power tool on.
A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at
all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts.
Loose clothes, jewellery or long hair can be caught in
moving parts.
POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool
for your application.
The correct power tool will do the job
better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) If the replacement of the supply cord is necessary, this
has to be done by the manufaturer or his agent in order
to avoid a safety hazard.
d) Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools.
Such preventive safety measures reduce
the risk of starting the power tool accidentally.
e) Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
Power tools
are dangerous in the hands of untrained users.
f) Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
g) Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work to be
performed.
intended could result in a hazardous situation.
SERVICE
a)
person using only identical replacement parts.
This will
ensure that the safety of the power tool is maintained.
SPECIAL SAFETY REFERENCES
•
resting on the surface.
• Always wear a dust mask during dry-polishing and sanding.
• Do not use large quantities of polishing agents. This might lead
to sliding of the polishing disk.
• Always refer to the regulations of the manufacturer of the used
polishing agent.
• Do not use damaged or worn out polishing pads or sanding
papers.
• The manufacturer recommends to use the following accessories
only: polishing pads and sanding paper, suitably for 180 mm
diameter.
• Place the power cord over your shoulder. Keep your movements
steady; do not move abruptly while working.
INTENDED USE
The polishing / sanding-machine is intended for polishing coated
surfaces and sanding wood, iron, plastic and similar materials using
abrasive paper.
PACKAGING CONTENT
• 1 polishing / sanding machine
• 1 grip
• 2 screws
• 1 allen key
• 1 polishing / sanding disk
Before using check all parts for transport damage. In case of damage
contact your dealer immediately. Check the package for complete-
ness. Inform your dealer about missing parts immediately.
TECHNICAL DATA
Voltage:
230V-50Hz
Power rating:
900W
Speed:
1500-4500min
-1
Connection thread:
M14
Polishing / Sanding disk diameter: 125 mm
L
wA
sound power level:
98dB (A)
L
wA
sound pressure level:
87dB (A)
Vibration a
w
:
6.76 m/s
-2
Protection Class:
II
Weight:
2.37 kg
EXPLANATION OF SYMBOLS
The following symbols can be found on the machine and/or on the
rating plate:
Read the instruction before using your
product.
Attention!
Wear ear protection
Wear safety glasses
Double insulation
