![background image](http://html1.mh-extra.com/html/abs/abt-fc-30/abt-fc-30_owners-manual_453120006.webp)
6
DOOR BINS (not applicable to all models)
Your unit may come equipped with storage bins in the door. Because of the temperature
characteristics of these units, items stored in these bins may not be maintained in the desired
temperature band. Please restrict the use of these bins for non-critical temperature storage.
Shelf Installation (not applicable to all models)
Hook shelf clips onto pilaster strips (see Illustration). Position all four shelf clips equal in
distance from the floor for flat shelves. Wire shelves are oriented so that cross support bars are
facing down.
Place shelves on shelf clips making sure all corners are seated properly.
Temperature control
NOTE: Temperature controls are preset at the factory to provide the desired air and product
temperatures inside of the units and require no further adjustment. Please contact us before
making any adjustments to determine if adjustment is necessary and, if so, to make sure it is
performed properly.
Both refrigerators and freezers have a manual thermostat located inside a box on the back of
the unit. This thermostat controls the compressor. Turning the thermostat towards the higher
numbers will make the unit colder. Lower numbers make it warmer. Turning the thermostat to
the off or 0 position will turn the unit off. For dual-temp units (refrigerator and freezer), this
thermostat controls the compressor based on freezer temperature. Temperature in the
refrigeration compartment is controlled by venting air from the freezer compartment