background image

Part number 20080, Rev 0 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PREMIERE STAINLESS STEEL PHARMACY REFRIGERATORS 

MODELS ABT-23SS-GP AND ABT-49SS-GP 

 

OWNER’S INSTRUCTIONS 

This manual describes how to operate and care for your appliance to get the best, most efficient, performance. 

 

READ THIS BOOK! 

Note to Customer: 

This merchandise was carefully packed and thoroughly inspected before leaving our plant.  Responsibility for its 

safe delivery was assumed by the carrier upon acceptance of the shipment.  As directed on the side of your 

packing carton, claims for loss or damage sustained in transit must be made on the carrier as follows: 

 

A.)

 

Visible Loss, Damage, Shortage External Evidence of Loss or Damage: 

This type of damage 

must

 be noted on 

the freight bill and acknowledged by the carrier’s agent (driver) at time of delivery. Make sure you get a signed 

copy. Send a written request for an inspection to the carrier.  

B.)

 

Concealed Damage

: This type of damage may not be discovered until the unit is being unpacked. When 

concealed damage is discovered, stop unpacking immediately and contact the carrier immediately to report 

the claim and request an inspection. This should be done as soon as possible and, in any case, must be done 

within 15 days or receiving the merchandise. If at all possible, do not move the item and save all packaging 

material for carrier’s inspection.  

C.)

 

FAILURE TO FOLLOW THESE INSTRUCTIONS MAY  RESULT IN THE CARRIER REFUSING TO HONOR YOUR 

COMPANY’S CLAIM. UNDER NO CIRCUMSTANCES SHOULD THE MERCHANDISE BE RETURNED TO THE 

MANUFACTURER. NO RETURNS WILL BE ACCEPTED WITHOUT PRIOR AUTHORIZATION. 

 

 

 

Horizon Scientific 

125 Varnfield Drive 
Summerville, SC 29483 
Phone:  800-648-4041 
Fax:      843-821-8051 

Warranty: 

Two-Year Parts and Labor 
5 Years Compressor Parts 

Revision Date 

08/27/2012 

 

 

Summary of Contents for ABT-23SS-GP
















Reviews: