ABS ABSFBM-50, Owner'S Manual

Page: 11 / 21

TROUBLE SHOOTING
10
Fault Possible Cause Remedy
The mixer does not
operate /start.
Not plugged into the
socket at main switch.
The main switch is “off”.
The bowl safety guard is
open.
The mixer overload has
been activated.
Stop button is still locked
in the down position.
Plug in and switch
on.
Turn on.
Place it down
position.
Contact supervisor /
service agent.
Release by rotating
and pulling.
The mixer starts and
then immediately
stops.
Both high and low speed
timers are set to zero.
The mixer overload has
been activated.
Fuse overload at the
power board.
Reset mix cycle on
both timers.
Contact supervisor /
service agent.
Contact supervisor /
service agent.
The mixer labors under
load.
Dough too stiff / tight.
Machine malfunction.
Review and adjust
dough consistency;
add more liquid.
Contact supervisor /
Service agent.
The mixer moves or
rocks during operation.
Floor not level or the
adjustable feet are
located incorrectly. Re-adjust level and
stabilize with
adjustable foot.
Excessive flour dust
coming from mixer. First speed timer set too
short. Extend first speed
mix / blending cycle.
The mixer bowl and
dough hook operate in
the wrong direction.
Inserting the mixer plug
into the incorrect socket
after cleaning.
Relocating the mixer in
another position after
maintenance.
Return to correct
position.
Consult authorized
electrical service to
rewire plug.