E-PGM+ / E-GANG4/6 / E-PGM Serial User’s Manual
2. Hardware
11
Figure 5 and the following list describe external features of the E-PGM Serial.
Figure 5. E-PGM Serial Top and Side Views for Function Description
①
10-pin IDC connector for In-System Programming (ISP)
②
SWD port for firmware update and development purpose (Do not use, it is not for
customers.)
③
A button for programming the target device
④
A button for reading the target device
⑤
LCD Screen for Information Display:
—
Device name, checksum data and options.
—
PASS/FAIL is shown as a result of programming, accompanied by error information
in the case of failure.
⑥
LED Indicator with red/green illumination shows the current status when writing is
complete:
—
Red for FAIL
—
Green for PASS
⑦
5-pin Molex 5264 connector for the interface with a Handler equipment
⑧
USB mini-B connector to a PC
⑨
Power Adaptor Connector for the 15V/1A external power
⑩
System Power Switch
