EN
5
Installation Requirements:
• Before connecting the sauna to a power source, please ensure all the wires, cords
and connections are connected properly.
• Plug the Zen Traditional Finnish Sauna into a proper wall power outlet. Do not share
the same outlet with any other appliances.
• Install the Zen Traditional Finnish Sauna on a completely level surface.
• Ensure the control system is in a well ventilated dry area. Do not place it next to any
heat source, in direct sunlight, where there is any type of vibration or in any damp or
dusty environment. It should not be placed in an area with other thermal radiating
objects.
• WARNING: To reduce the risk of electrocution and burns, do not operate unless
heater guard is correctly in place.
• CAUTION: Do not place combustible materials on or against heaters at any time.
• To reduce risk of electric shock and/or fire, do not expose the control system to
direct water contact or rain. Do not open the cover to the control system as there are
high tension fittings that can be dangerous. Only authorised and approved dealer
technicians should make any needed or necessary repairs.
• Any unauthorised repairs, alterations or modificaions can lead to serious injuries, can
cause the sauna to operate outside its intended specifications parameters and will
void the warranty
• WARNING: Reduce the risk of electrocution by disconnecting the power supply
before servicing.
• Do not spray the exterior with water. If the area you are installing the sauna has
a tendency for dampness, place rubber matting or some other suitable barrier
underneath the sauna.
• Do not store flammable objects or chemical substances near the sauna.
• Drink a cup of water before the sauna session. After two hours of continuous use,
shut the sauna down for one hour.
• If the sauna becomes too warm, open the vent in the ceiling or open the front door.
• After your sauna session, turn off, and unplug the power cord.
TRANSPORTATION AND STORAGE
• Avoid exposure to rain, snow or strong collisions during transport.
• Do not store in damp environments.
