EN
9
8. Assembling the lamp and lampshade
First, fix the lamp holder with screws,
and connect the power supply lines.
Then lock the lamp and glass cover
tight and lock it with screws. After that,
put the lampshade under the glass
cover, then lock it with screws.
9. Install the hygro thermometer
Take out the hygro thermometer, and
put it on the level of panel.
NOTE: do not put the hygro
thermometer under the heat stove.
10. Disassemble the wooden frame
Place wooden frame into sauna room,
and lock it with screws. Disassemble
one side batten of the wooden support
frame.
11. Connect the power supply line of the
heater
Upend the sauna Harvia Vega
heater into the wooden frame, and
disassemble the right aluminum
board, then connect the power supply
line of the sauna heater.
NOTE: Keep the power supply line
away from the heater and lock them
tight with screws. After assembling
the wires, install the right aluminum
board and wooden batten, and place
the Harvia Vega Heater in the correct
location (please reference detailed
installation instructions which come
with the Harvia Vega Heater or refer
to the Harvia Vega Heater Manual
on www.vitality4life.com.au/zen-
traditional-finnish-sauna-5-person)
13. Position sauna rocks
Position sauna rocks by placing larger
rocks on the bottom and smaller rocks
on top. Leave sufficient gaps between
the rocks and then fix the baffle into
place to facilitate air circulation.
