EN
12
Maintenance
Daily Maintenance
• Regular comprehensive cleaning will extend the life of your WalkSlim 610
• Always turn the power off at the power outlet and make sure there is no moisture
before daily cleaning and maintenance.
• Clean dust out regularly and ensure the exposed parts of the tread belt are clean.
• Wear clean sports shoes to avoid any dust or impurities getting into the tread belt
and board.
• Use a damp cloth with soap or detergent to clean the tread belt. Do not use
excessive water and avoid leakage to the electrical components and underneath the
running belt
• Disconnect the power cord when the WalkSlim 610 will not be used for a long time.
• Do not store the treadmill in the bathroom or outside and avoid areas with a lot
of moisture.
• Always unplug the WalkSlim 610 before performing maintenance.
Tread Belt Adjustments
While each treadmill tread belt has been finely adjusted, after transport and installation
it may need to be adjusted. Adjustment may also be required throughout the life of the
treadmill. Reasons for this may be:
1. The treadmill has been on an uneven surface.
2. When in operation, the user walks / runs unevenly (to one side) on the belt.
3. The users on the treadmill have different physical weight and force.
A tread belt deviation may seriously damage the tread belt, so must be corrected once
noticed.
Note: Correct maintenance of the treadmill is important. Issues arising from ongoing
tread belt misalignment will not be covered under warranty.
How to adjust alignment on left side:
tighten the bolt (clockwise) on the left side
if the belt is deviating to left side or loosen
bolt on the right side (counter clockwise).
How to adjust alignment on right side:
tighten the bolt (clockwise) on the right
side if the belt is deviating to right side
or loosen bolt on the left side (counter
clockwise).
