EN
9
Using your Walkslim 610
STARTING THE WALKSLIM 610 USING THE REMOTE CONTROL
Pair the remote control and the WalkSlim 610 as follows:
1. Press the Start/Pause button on the remote control and aim the remote at the LED
display screen on the base of the Treadmill
2. After 10 seconds, unplug the safety key from the treadmill
3. Press the Start/Pause button on the remote control for about 3 seconds, and the
treadmill will sound “didi...”, indicating that the remote control and the treadmill have
been successfully paired. The remote control can now be used to control the treadmill .
4. Attach the power cord to the treadmill and plug into dedicated power outlet
5. Attach safety key to the yellow position and attach safety clip onto your clothing
6. Check the stability and function of the treadmill by standing on the footrail, hold
the handle with one hand and with the other hand press the Start/Pause button on
remote control.
7. The treadmill will now be on and start, up in a delay of 3 seconds and run at a speed
of 1.0km/h. Press Speed Incrrease and motor speed will rise to reach a speed of
2.5-3.5km/h (this is the most comfortable speed for running). Hold the handles with
both hands and step on the tread belt with both feet successively. You will reach the
same speed with the tread belt .
8. You can increase the speed of running after a few minutes. Press the Speed Increase
button on the remote control or press the Speed Decrease button to slow down.
9. In the process of movement, you can press the Start/Pause button on the remote
control to make the motor stop running at any time.
Note: When the safety key is pulled off, the treadmill will immediately stop during
exercise. The display will stop all functions and shows E07.
Start/Pause
Speed Decrease
Speed Increase
