Abode ADSM5001, User Manual

Page: 14 / 23

14
Cleaning and Care
Before you clean the appliance, disconnect the mains plug from the wall socket.
To clean the exterior of the device, use a damp, soft cloth and mild detergent.
NEVER IMMERSE THE STEAM MOP IN WATER
When wiping off the main body, do not allow moisture in the area around the
on/off button or indicator lights.
Wash non-electrical accessories in warm soapy water and allow to dry thoroughly
before reuse.
If the steam mop is damaged, contact the customer service helpline.
Care of your microfibre cleaning pads
Wash pads in warm water, no more than 40 degrees.
Wash separately. Do not use fabric softener and do not tumble dry. Dry on a
line.
Should there be any loose threads on the microfibre pad, carefully cut the
threads with scissors.
Do not try to pull any threads or cut any threads at the base.
If you live in a hard water area, over time the filter will become
blocked and affect the performance of the steam mop.
Check and change the filter regularly to ensure your steam mop
works to its optimum level.
As the filter becomes more blocked the colour will darken and
discolour.
The filter should be changed every 6 months.
To change the filter, remove the water tank ( 1 ) on page 8.
Grip the water filter and pull upwards ( 2 ).
Slot the new water filter into the back of the steam mops body.
Ensure the guides on the sides of the filter are correctly fitted.
New filters are available to purchase from Product Care,
call
0845 209 7461 or visit us at www.productcareuk.com