9
3. Connect WAN Cable
Connect the DSL or Cable modem to the WAN port on the Wireless Router. Use the cable
supplied with your DSL/Cable modem. If no cable was supplied, use a standard cable.
4. Power Up
•
Power on the Cable or DSL modem.
•
Connect the supplied power adapter to the Wireless Router and power up.
Use only the power adapter provided. Using a different one may cause hardware damaged.
5. Check the LEDs
•
The
Power
LED should be ON.
•
For each LAN (PC) connection, the LAN
Link/Act
LED should be ON (provided the PC is
also ON.)
•
The
WAN
LED should be ON.
•
The
WLAN
LED should be ON.
For more information, refer to
Front-mounted LEDs
in Chapter 1.
Summary of Contents for WR5502
Page 1: ...802 11b g n Wireless Broadband Router User s Manual ...
Page 2: ......
Page 18: ...16 ...
Page 63: ...Appendix B Specifications 61 ...