Abocom WR5205, User Manual

Page: 28 / 64

25
know when to wake up to receive the beacon. Range 20-999. (Default
Beacon Interval is 100.)
Data Beacon
Rate (DTIM)
Range from 1 to 255. (Default data beacon rate is 1.)
Fragment
Threshold
Fragmentation mechanism is used for improving the efficiency when high
traffic flows along in the wireless network. If the Wireless Router often
transmit large files in wireless network, you can enter new Fragment
Threshold value to split the packet. The value can be set from 256 to 2346.
(The default value is 2346.)
RTS Threshold
RTS Threshold is a mechanism implemented to prevent the “Hidden Node”
problem. If the “Hidden Node” problem is an issue, please specify the
packet size. The RTS mechanism will be activated if the data size exceeds
the value you set. (The default value is 2347.)
Warning:
Enabling RTS Threshold will cause redundant network
overhead that could negatively affect the throughput performance instead of
providing a remedy.
This value should remain at its default setting of 2347. Should you
encounter inconsistent data flow, only minor modifications of this value are
recommended.
Short Preamble
Select Disable or Enable this function. (Default setting is Disable.) A
preamble is a signal used in wireless environment to synchronize the
transmitting timing including Synchronization and Start frame delimiter.
Short Slot Select Disable or Enable this function. (Default short slot setting is Enable.)
Tx Burst Check the box to enable the Tx Burst function. (Default Tx Burst setting is
Enable.)
Pkt_Aggregate Select Disable or Enable this function. (Default setting is Enable.)
Wi-Fi Multimedia
WMM Capable
WMM Power Save is a set of features for Wi-Fi networks that help
conserve battery power in small devices such as phones, PDAs, and audio
players. The certification for both access points and client devices uses
mechanisms from the recently ratified IEEE 802.11e standard, and is an
enhancement of legacy 802.11 power save. WMM Power Save helps pave
the way for rapid proliferation of Wi-Fi technology into devices dependent
on battery power.
Select Disable or Enable to use or stop Wi-Fi Multimedia function. (Default
setting is Enable.)
APSD Capable Automatic Power Save Delivery is a more efficient power management
method than legacy 802.11 Power Save Polling. Most newer 802.11 station
already support a power management mechanism similar to APSD. APSD
is very useful for a VoIP phone, as data rates are roughly the same in both
directions. Whenever Voice data are sent to the Access Point, the Access
Point is triggered to send the buffered Voice data in the other direction.
After that the Voice over IP phone enters doze state until next Voice data
have to be sent to the Access Point.
Select Disable or Enable this function. (Default setting is Disable.)
DLS Capable
Direct Link Setup, this function will be enabled under the connection with