12
Server
Clone PC’s MAC
Address
Check to enable this function.
Clone MAC
Address
Your ISP may require a particular MAC address in order for you to
connect to the Internet. This MAC address is the PC’s MAC address
that your ISP had originally connected your Internet connection to.
Type in this Clone MAC address in this section to replace the WAN
MAC address with the MAC address of that PC.
Clone IP Address
Shows the IP address of the device from the pull-down menu.
Apply
Click to save and apply the current settings.
Cancel
Click to discard the current settings.
PPPoE Mode
User Name
Maximum input is 20 alphanumeric characters (case sensitive).
Password
Maximum input is 20 alphanumeric characters (case sensitive).
MTU (Maximum
Transmission
Unit)
Click the pull-down menu to select the most appropriate MTU
(Maximum Transmission Unit, namely the maximum packet size,
the default value is 1492) for your application. Reducing the packet
size can help connecting to certain web sites or speeding up packet
transfer rate. If the incorrect selection is entered, you may not be
able to open certain web sites.
Authentication
Type
Select PAP, CHAP, MSCHAP-v1, MSCHAP-v2 or Auto form the
pull-down menu.
MPPE
Encryption Level
When the authentication type has been set to be MSCHAP-v1,
MSCHAP-v2 or Auto, here can select None, 40 bits, 56bits, 128bits
or Auto form the pull-down menu.
PPPoE IP
Address Mode
Select Dynamic or Static for the pull-down menu.
Physical IP
Address Mode
Select Dynamic or Static for the pull-down menu.
DNS mode
Select from the pull-down meun for Static or Dynamic DNS mode.
