26
Delete Selected
Select the unwanted URL addresses and then click the Delete
Selected button to eliminate them.
Delete All
Click to delete all the URL addresses in the table.
Reset
Click to clear the current settings.
Port Trigger
Port Trigger Settings
Port Trigger
Settings
Select Disable or Enable from the pull-down menu.
Incoming
Protocol
Select the protocol (TCP, UDP or TCP&UDP) used to the remote
system or service.
Incoming Port
Range
For TCP and UDP Services, enter the beginning of the range of port
numbers used by the service. If the service uses a single port number,
enter it in both the start and finish fields.
Trigger Protocol
Select the protocol (TCP, UDP or TCP&UDP) used to the remote
system or service.
Trigger Port
Range
For TCP and UDP Services, enter the beginning of the range of port
numbers used by the service. If the service uses a single port number,
enter it in both the start and finish fields.
Comment
You may key in a description for the port trigger.
Current Port
Shows the current Port Trigger status.
